2) Position aux adapter and intake manifold on cylinder head 3) Install the M8 washers and socket head screws into intake manifold and adapter. Make sure all o-rings are still in position. TQ socket head cap screws to 18 ft-lbs. To finish the hardware install, you will need to disconnect the oem fuel line connection […]
The 4 YELLOW wires with black stripes will tap into the coil pack outputs at pins 42,43, 57, and 72 on the c1381E plug (if you are unsure which one that is, check a couple of pins and confirm the wires match the colors noted below). It doesn’t matter which of the YELLOW wires go […]
The 4 YELLOW wires with black stripes will tap into the coil pack outputs at pins 69,70, 93, and 94 on the c1381E plug (if you are unsure which one that is, check a couple of pins and confirm the wires match the colors noted below). It doesn’t matter which of the YELLOW wires go […]
The 4 YELLOW wires with black stripes will tap into the coil pack outputs at pins 42,43, 57, and 72 on the c1926E plug (if you are unsure which one that is, check a couple of pins and confirm the wires match the colors noted below). It doesn’t matter which of the YELLOW wires go […]
The 4 YELLOW wires with black stripes will tap into the coil pack outputs at pins 45,58, 59, and 60 on the c1551E plug (if you are unsure which one that is, check a couple of pins and confirm the wires match the colors noted below). It doesn’t matter which of the YELLOW wires go […]
The 4 YELLOW wires with black stripes will tap into the coil pack outputs at pins 45,58, 59, and 60 on the c1551E plug (if you are unsure which one that is, check a couple of pins and confirm the wires match the colors noted below). It doesn’t matter which of the YELLOW wires go […]
The 4 YELLOW wires with black stripes will tap into the coil pack outputs at pins 42,43, 57, and 72 on the c1551E plug (the topmost plug on the ECU). It doesn’t matter which of the YELLOW wires go to which output, only that they each go to their own output The GREEN wire will […]
The TS, ST, and 2.3 blocks all share the same bore (87.5 mm) and deck height (231 mm). Because of this, we can change cranks and rods to to obtain either a 2.0 L or 2.3 L displacement without any boring of the block. But there are many things to consider when choosing the correct […]