SVT Design Fab – 4″ Air Intake for Fiesta ST
$315.00
-
The largest cold air intake pipe that fits the stock intake location on a Fiesta ST. This 4″ to 3.5″ crossover setup pairs printed PA6-GF construction with silicone boots, T bolt clamps, and a Mishimoto air filter for a real gain in intake sound and BOV response.
Features:
- 4″ intake pipe with PCV, EVAP, and MAF provisions
- 4″ Mishimoto cone filter
- 4″ to 3.5″ transition elbow
- 3.5″ crossover tube with bracket
- 3.5″ turbo inlet pipe
- Boots and clamps included
- 1″ to 5/8″ PCV transition pipe
Applications: Fiesta ST, 1.6L EcoBoost
SVT Design Fab – 4″ Air Intake for Fiesta ST
The largest cold air intake pipe that fits the stock intake location on a Fiesta ST. This 4″ to 3.5″ crossover setup pairs printed PA6-GF construction with silicone boots, T bolt clamps, and a Mishimoto air filter for a real gain in intake sound and BOV response.
Features:
- 4″ intake pipe with PCV, EVAP, and MAF provisions
- 4″ Mishimoto cone filter
- 4″ to 3.5″ transition elbow
- 3.5″ crossover tube with bracket
- 3.5″ turbo inlet pipe
- Boots and clamps included
- 1″ to 5/8″ PCV transition pipe
Applications: Fiesta ST, 1.6L EcoBoost
Note: specify your turbo when ordering so the correct turbo boot is included. Not compatible with the SVTDF scoop duct. Requires the 2014 to 2015 style evap harness, our team offers the evap harness conversion as an add on if you’re running the dual barb style harness.
Current lead time: 3 to 4 weeks
Available at Engineered Motorsport Solutions INC.
www.emsinc-tn.com | (423) 500-4901 | Sales@emsinc-tn.com
| Weight | 25 oz |
|---|
Brand
SVT Design Fab
Be the first to review “SVT Design Fab – 4″ Air Intake for Fiesta ST”
Related products
-
-
Reviews
There are no reviews yet.